Nutanix BMC not responding to firmware upgrade

Nutanix BMC not responding to firmware upgrade - IPMI SuperMirco

We are using Nutanix 3000 (SuperMicro Server) and while upgrading the Firmware for bmc i noticed that it didn't take affect.

In our case i had to ssh into the VM host and Shut it down using command line.

To get bmc working , we needed to pull the host out of the chassis and then put it back in .

IPMI worked fine after that and did show the upgraded firmware version.

Hope this helps.

Comments

Group Policy Object did not apply because it failed with error code '0x80070534 No mapping between account names and security IDs was done

One of our servers was losing the Local Admin settings as we control them using GPO (restricted Groups) We were receiving the following event on this particular server : Event ID 4098 Application Event Log The computer 'Administrators (built-in)' preference item in the 'Servers Local Admins {odjd9DBD-22AF-48EA-ADF5-F42ADE4182hst}' Group Policy Object did not apply because it failed with error code '0x80070534 No mapping between account names and security IDs was done.' This error was suppressed. To fix the issue we deleted all the folders from the following location and rebooted the server C:\ProgramData\Microsoft\Group Policy\History Hope this helps.

iDRAC 7 Shows no Signal in Virtual Console Preview

Recently i logged on to iDRAC for one of our Dell R720 servers,however somehow the console redirection did not work at all. I kept on seeing No Signal on the Virtual console Preview. I tried Rebooting the server but that did not help. Finally i clicked on Reset iDRAC and this did the trick. It may take around 2 -5 minutes before you can access iDRAC page again. I had to power on the server through iDRAC before anything showed up on console. Hope this Helps.

Close Open Files in Isilon

To close Open files in Isilon Sometimes we may have to Close open files on Isilon , This is how we can accomplish it First find all the Open Files using the Following Command: isi_for_array "isi smb openfiles list" To Narrow the search we can grep the result as an example isi_for_array "isi smb openfiles list" | grep -i abc Once you find the files the 6 digit number is the id for that open file. To close the open file run the following command isi_for_array isi smb openfiles close "123456" -f Hope this helps

Kitaab

Search This Blog